Voice Changer Software

Fig. 2 - Import Mrs. Obama's voice as the new sample voice [Comparator]

The newly added sample voice will be set for the comparator automatically (see Fig. 3).

Note: To re-listen to the new sample voice, click the Play (1) button.

Fig. 3 - The newly added sample voice appears in Voice Comparator dialog box

TOP

- In the Record section, click the Rec (2) button to start recording your voice. Try to mimic Mrs. Obama's voice over the tone, speed, rhythm and volume.

*** Important: The quality of the final result also depends on how you mimic the sample voice in this step.

- If the record of your voice is qualified, VCS Comparator will make the comparing automatically, then suggest the best settings in Pitch, Timbre & Adv. Tune that make your voice sound most alike to the sample of Mrs. Obama's voice.

- Click OK to close the Comparator and return to the main panel. The suggested settings will be applied to the Voice Morpher module.

Now you can speak to the microphone to check if the changed voice is what you want or not. If you are satisfied with it, you've done, you can save it as a nickvoice file for later use. If you are not, try adjusting slightly the pitch and timbre (using the Voice Morpher graph) to see if you can get a better result. You may also want to apply advanced effects to make the result voice sound better, we have a simple instruction on that in step 4, and 5.

Fig. 4 - Record your voice [Comparator]

TOP

- Click the Advanced button to expand the Advanced panel.

- Select the Equalizer tab (1), turn it ON (2), click on the Preset button and select Soft.

Tip: In most cases, the preset works well. But if it does not, try the other ones or load your own settings. You can also make changes on the preset when it is loaded in the Equalizer tab. If you don't like the effects at all, click the On/Off button on the tab to turn if off.

TOP

Fig. 5 - Choose the Soft preset [Equalizer tab]

If you feel that the output voice has background noise, follow this step to eliminate them. But firstly, you are recommended to save your current morphing settings, click the Save button on the Voice Morpher module on the main panel to save them. The saved file will keep all the settings that are being applied in VCS.

Get back to the Advanced panel:

- Select the Sound Quality tab, turn it ON (1), turn on the Limiter module (2), turn on the Noise Reduction module (3), then slightly adjust these parameters: Release, Attack, Reduction, and Threshold until the noise is less dominance.

TOP

Fig. 6 - Improve the output quality [Sound Quality tab]