Step 2 - Add your own voice
To use
Parody Voice Maker and Mixer,
you have to add your own voice into
Parody Voice Maker.
AV Voice Changer Software will compare your voice
and the parody voice automatically and adjust the
invisible parameters to make your voice similar with the
parody voice.
· Click
Rec
button
(1)
to record your voice. Please click it again
when you finish to stop recording and save your
voice. You can press Play button
(1)
to listen to your voice again.
Note:
You must be sure that all the effects and
pitch-timbre changer are disabled when you are
recording.
· If
you have already had the file of your voice. Click
the
Browse
button
(2)
and indicate the file.
· Note:
Your own voice will decide the quality of the Parody
voice, so please try to speak a short conversation
in about 30 seconds. It only supports .wav file so
if you record your voice by other software, please
let it save as .wav file.
Step 3 - Add parody voice
After adding your voice, now you can add a Parody
voice.
· Click
Browse
button
(1)
to add the sound file of new parody voice. You can
press
Play
and
Stop
button
(2)
to listen the file again.
· Enter
the name of
new parody voice in the
Parody Name
box
(3).
Note:
16000Hz 16bit Mono
is recommended.
· Type
the new group of new parody voice at Parody group
box
(4).
If you want it add to a current group, just type
exactly the name of the group again. Finally, press
Create button to finish.
· Now
the new parody voice and new group will appear in
B box.
Check the box before the parody voice you want to
use. The voice you have chosen will be shown in the
box beside.
· Now,
click
Close
button.
Step 4 - Using Parody
Mixer
Now,
go to the
Parody Mixer to access the Parody Feature.
There are many things you have to know in order to
use
Parody Mixer correctly.
(1)
By looking at this number, you know what
percentage your voice is similar to the parody voice
(2)
This box show the name of parody.
(3)
This is Parody Cursor. By moving it, you can
control the mixing percentage of voices.
(4)
Click on this button to choose the parody voice.
(5)
Finally, you can save your mixing as a new
parody voice for later use by clicking on the
Save button. Click the Load button
to load a saved parody.
(6)
Click the Reset button to move the
cursor to the center of the Parody Mixer table. At
this position, the mixing percentage of each voice
is 25%.
(7)
If you don't want to use Parody Feature any
more, click On/Off
Note:
You can totally mimic the voice of someone by moving
the cursor to the edge of the table
Note: You can use Parody Feature and Pitch,
Timbre and Advanced Tune consentaneously. Combining them
will help you have the best changed voice. |
