Voice Changer Software

Step 1 - Change settings on the Stereo or Mono audio streams

Step 2 - Change the encoder settings of the Recorder

Step 3 - Choose the file type of the output file

What is .WAV file?

On the main panel, move the cursor (1) of the Stereo / Mono scale either left or right to instruct how your records will be.

In this illustration, the position of (1) shows that the file will be saved in Stereo type with 44100 bits. (read a tip on this).

Note: Only when the DUPLEX mode is ON (2) that you can make change to the Stereo/Mono scale. If the DUPLEX mode is off, it is because there is a playback audio stream(s) in your computer, please turn off any media player or any application that is producing audio stream at that time.

Then, click on the Recorder button (3) on the main panel to open Voice Changer Software Recorder.

Fig 1 - Change the Stereo/Mono scale, then open VCS Recorder [Main panel]

- Check the option Record non-morphed streams at VCS (1) to set VCS Recorder to record audio streams out of VCS's morphing effects.

- Click the Settings menu (2) to enter the settings window. Click the Encoders tab (3) to switch to this tab.

Fig 2 - Go to the Recorder settings window and visit the Encoders tab [Recorder]